The Best Apo Refractors for Astrophotography
Ten imaging refractors from a $605 triplet to a $3,499 five-inch astrograph, plus the three flatteners that complete them: what doublet, triplet and Petzval mean for your stars, and how to match a scope to a sensor.
In this guide
The telescope that found Pluto was a refractor built to take photographs. Clyde Tombaugh spent 1929 and 1930 at Lowell Observatory exposing glass plates through a 13-inch lens made for one job, a wide flat field of sharp stars, and the planet turned up as a dot that moved between two of them. The full story is here. The instrument was called an astrograph, and the small refractors on this page are its descendants.
An imaging refractor is the easiest telescope to take a good deep sky photograph with. There is no mirror to align and no central obstruction, the tube is short, and a 60 to 80 mm lens is light enough for a modest mount. These are ten I would look at, from $605 to $3,499, and the three flatteners that some of them need before the stars are sharp to the corners.
Outer Space Trip may earn a commission from links on this page; your price is the same. How we choose. Prices move — the links show current pricing.
Which one should you buy?
For a first imaging telescope, a 60 to 72 mm refractor with its flattener included or built in. The short focal length forgives tracking errors, and the wide field suits the big nebulae that reward a beginner soonest. Step up to 80 to 103 mm when you want galaxies and smaller targets, and only buy 127 mm or more once the mount under it is settled.
Sharpstar 61EDPH III triplet refractor
An air spaced triplet at a doublet price, with a 2.5-inch rack and pinion focuser and a stated 44 mm image circle. Cloudy Nights owners report round, tight stars on APS-C sensors once the flattener or reducer is fitted. APS-C and smaller sensors on a star tracker or small equatorial mount; full frame with the matching flattener (44 mm image circle per the retailer).
- Needs the separate $219 flattener or 0.75x reducer to image, so the real price is about $824.
- Owners report the focuser arrives adjusted very tight, and one describes the images as slightly soft with some color when pixel peeping.
Sharpstar full-frame flattener for the 61EDPH III
The 61EDPH III is a plain triplet with a curved field, and this is the corrector made for it, with standard 55 mm back focus and a built in 2-inch filter thread. Buy this one to keep the native 360 mm, or the same price 0.75x reducer (270 mm, f/4.4) for a wider, faster field. Only the Sharpstar 61EDPH III; covers up to full frame sensors per the retailer.
- Fits one telescope and has no use if you change scopes.
- High Point’s page gives no image circle figure or weight, and we could not reach Sharpstar’s own page to confirm them.
Apertura 72EDR doublet with adjustable flattener
The kit includes the adjustable M48 flattener and a 32 mm guidescope, so nothing else optical has to be bought to start imaging. A Cloudy Nights owner review of this exact kit reports good star shapes across the field with the flattener. A first deep sky rig with an APS-C or smaller camera on a tracker or light equatorial mount; the 4.8 lb tube keeps mount demands low.
- A doublet shows more blue violet fringing on bright stars than the triplets and quintuplets further up this list.
- Owners found the flattener spacing needed trial and error (one settled near 56.5 mm), and no image circle figure is published.
Askar 65PHQ quintuplet astrograph
The field corrector is built into the five-element design, so the camera threads on and focuses with no spacing to work out. The maker lists a 44 mm image circle and a 2 kg tube weight. Beginners who want to skip back focus spacing, with sensors up to full frame (44 mm image circle); 2 kg tube.
- f/6.4 is slow for a 65 mm scope; the 0.75x reducer that fixes it is a separate $219.
- Cloudy Nights has at least one report of a unit with misshapen stars that had to be exchanged, so test it inside the return window.
William Optics RedCat 61 WIFD
A Petzval design with a flat 46 mm image circle and an internal focuser, so the camera does not hang on a moving drawtube. Sky at Night Magazine and AstroBackyard both reviewed it and praised the flat field and color correction. Large nebulae and wide star fields with sensors up to full frame (46 mm image circle); 2.47 kg tube, 3.39 kg with rings and dovetail.
- Sky at Night found the focuser wheels caught the saddle on a Sky-Watcher AZ-EQ6, so check clearance on your mount.
- AstroBackyard questioned whether it earns its premium over cheaper 60 mm scopes, and 300 mm is too short for small galaxies.
Askar 103APO triplet refractor
A 103 mm air spaced triplet with a 3.3-inch focuser and three matched correctors (1x, 0.8x, 0.6x) for about the price of an 80 mm premium scope. Cloudy Nights owners report sharp narrowband results and good corners with the 1x flattener. Narrowband and one-shot-color imaging of midsize nebulae and larger galaxies on an EQ6 class or strain wave mount; 4.75 kg tube, 5.5 kg with rings.
- Only one ED element: owners see some color fringing in broadband RGB, most with the 0.6x reducer.
- Needs a flattener or reducer to image ($219 and up), and owners have posted focuser adjustment fixes.
Askar 1x full-frame flattener for the 103APO
The 103APO has no built in corrector, and this three-lens flattener is the one that keeps its native 700 mm and f/6.8. It has standard 55 mm back focus and an internal 2-inch filter thread. Only the Askar 103APO; the retailer describes a flat field across a full frame camera.
- Fits one telescope; the 0.8x reducer costs the same $219 and is the better buy if you want speed over image scale.
- No image circle diameter is published, only a full frame claim.
Askar 80PHQ quadruplet astrograph
The corrector is part of the 3+1 optical design, giving a 44 mm corrected circle with no back focus distance to set. A Cloudy Nights owner reports excellent color control and a flat field on an IMX533 camera. Full frame and APS-C cameras (44 mm image circle) where a flat field with no spacing work matters more than speed; 3.9 kg tube.
- f/7.5 is slow for imaging, and owners call it expensive for that speed; the 0.76x reducer is another $263.
- At 4.7 kg with rings it is heavier than most 80 mm triplets.
William Optics Gran Turismo 81 WIFD
An FPL-53 triplet with an internal focuser that removes drawtube sag as a source of tilt. AstroBackyard and Sky at Night Magazine both reviewed it, and a Cloudy Nights owner who had the previous GT81 IV reports far less tilt with this version. Midsize and large nebulae with APS-C or full frame cameras (45 mm image circle) on an AM5 or EQ6-R class mount; 3.58 kg tube, 4.56 kg with rings.
- The flattener is separate ($255.55), and reviewers and owners both lost time getting its spacing and adapters right.
- A Cloudy Nights owner found the focuser knob hits the ZWO AM5 saddle.
William Optics Flat6AIII 0.8x reducer/flattener
William Optics lists this as the 0.8x corrector for the GT81 WIFD, with a 44.4 mm image circle and a rotating collar that sets back focus without spacer rings. On the GT81 a 0.8x factor works out to about 382 mm and f/4.7. William Optics GT81 (WIFD and IV), GT71, ZenithStar 81 and ZenithStar 103; the FluoroStar 91 needs an M92 adapter.
- William Optics claims a flat field over 97 percent of a full frame sensor, not all of it, and a Cloudy Nights commenter says full frame corners are hard to get.
- Each scope needs a different collar setting (62.1 mm back focus on the GT81), and a wrong setting or filter position produces radial star trails.
Apertura 90mm triplet package
The package includes the 1x flattener, a 32 mm guidescope, a hard case and a 2.5-inch rotating focuser, which most rivals sell separately. Cloudy Nights owners describe good fit and finish and good results with the included flattener. Buyers who want one box: full frame or APS-C cameras (44 mm corrected circle with the included flattener) on an EQ6 class or strain wave mount; 9.8 lb tube.
- Owners believe it shares its optics with the Astro-Tech AT90EDX, which costs less without the extras, and Apertura publishes no Strehl guarantee.
- One owner found corner stars imperfect with the optional 0.8x reducer ($199.95), better with the included 1x flattener.
Explore Scientific 127mm FCD100 carbon fiber triplet
At 14 lb it is light for a 5-inch triplet, and Cloudy Nights owners report minimal false color from the FCD100 glass. A Cloudy Nights imaging thread calls it one of the more manageable ways to put a 5-inch refractor on an AM5 class mount. Galaxies, planetary nebulae and smaller targets at 952 mm on an EQ6-R or AM5 class mount; 14 lb (6.4 kg) carbon fiber tube.
- The stock 2.5-inch HEX focuser is the most common owner complaint for imaging, and many replace it or add a motor.
- No flattener is included and no image circle is published; budget for Explore Scientific’s flattener or reducer.
Askar 130PHQ quadruplet astrograph
A 130 mm quadruplet with the corrector built in and a 60 mm image circle, so there is no flattener to buy or space. The Cloudy Nights review found the field flat corner to corner with round stars across the frame. Full frame and larger sensors (60 mm image circle) at 1000 mm on a mount rated well above its 13 kg all up weight.
- The tube is 10.5 kg, 13 kg with rings and dovetail; the same review calls it very big and heavy.
- f/7.7 is slow, owners have complained about the optional 0.7x reducer ($384), and at least one unit was replaced under warranty.
The picks at a glance
Prices are High Point Scientific’s on the day I read them, and every one was in stock. Flatteners are listed with the telescope they are made for.
| Product | Class | Key spec | Price |
|---|---|---|---|
| Sharpstar 61EDPH III triplet refractor | 50–72 mm | Aperture: 61 mm | $605 |
| Sharpstar full frame flattener for the 61EDPH III | Flattener | Type: Flattener, keeps the scope at 360 mm f/5.9 | $219 |
| Apertura 72EDR doublet with adjustable flattener | 50–72 mm | Aperture: 72 mm | $780 |
| Askar 65PHQ quintuplet astrograph | 50–72 mm | Aperture: 65 mm | $899 |
| William Optics RedCat 61 WIFD | 50–72 mm | Aperture: 61 mm | $1,148 |
| Askar 103APO triplet refractor | 80–103 mm | Aperture: 103 mm | $1,199 |
| Askar 1x full frame flattener for the 103APO | Flattener | Type: 1x flattener, keeps 700 mm f/6.8 | $219 |
| Askar 80PHQ quadruplet astrograph | 80–103 mm | Aperture: 80 mm | $1,499 |
| William Optics Gran Turismo 81 WIFD | 80–103 mm | Aperture: 81 mm | $1,898 |
| William Optics Flat6AIII 0.8x reducer/flattener | Flattener | Type: 0.8x reducer/flattener, adjustable back focus | $256 |
| Apertura 90mm triplet package | 80–103 mm | Aperture: 90 mm | $2,000 |
| Explore Scientific 127mm FCD100 carbon fiber triplet | 120–130 mm | Aperture: 127 mm | $2,800 |
| Askar 130PHQ quadruplet astrograph | 120–130 mm | Aperture: 130 mm | $3,499 |
Doublet, triplet, Petzval: what the words mean
A lens bends blue light more than red, so a simple refractor puts a colored fringe around bright stars. An apochromatic design uses extra low dispersion glass and more elements to bring the colors to the same focus. A doublet has two elements and can be very good with the right glass. A triplet has three and corrects color more completely, at more weight and cost and a longer cool down.
A Petzval or quadruplet or quintuplet design adds elements at the back of the tube that flatten the field inside the telescope. That is the practical difference for a photographer. With those designs you attach the camera and focus. With a doublet or a plain triplet you add a separate field flattener and set the distance between it and the sensor, usually 55 mm, to within a millimeter or so.
Why a flattener matters
A refractor focuses onto a curved surface and a camera sensor is flat. Without correction the stars in the center are points and the ones in the corners are small streaks. A flattener fixes that. A reducer flattener also shortens the focal length, which widens the field and shortens exposures. Each is designed for a specific telescope, which is why the three on this page are named for the scope they fit.
Match the scope to the sensor and the mount
Two numbers decide what fits. The first is the image circle, the diameter of sharp, evenly lit field the telescope delivers: a full frame sensor needs about 44 mm, and an APS-C sensor about 28 mm. The second is weight. A mount carries a photographic load well at about half its rated payload, so a 5-inch triplet with a camera, guide scope and focuser belongs on a mount in the class of the ones in the mounts guide, while a 61 mm astrograph will ride on a star tracker.
The camera is the other half of the decision, and the astrophotography camera guide covers which sensors pair with which focal lengths.
What to skip
An achromat for imaging, however low the price: the color fringing is in every frame. A long, slow refractor as a first imaging scope, since focal length multiplies every tracking error. And any flattener bought without checking it is the one made for your telescope.
If you want one answer
A 72 mm doublet that ships with its flattener is the least expensive way onto the ladder with nothing left to work out. If the budget allows a flat field design in the 60 mm class, it removes the spacing step for good.
Frequently Asked Questions
What is the best refractor for astrophotography for a beginner?
A 60 to 72mm apochromatic refractor with its field flattener included or built into the optics. The short focal length forgives tracking errors, the wide field suits large nebulae, and the tube is light enough for a modest mount.
Do I need a triplet for astrophotography?
No. A triplet corrects color more completely, but a doublet made with good extra low dispersion glass and used with its matched flattener takes sharp, clean images, and it costs less, weighs less and cools faster.
What is a Petzval refractor?
A design with extra lens elements at the rear of the tube that flatten the field inside the telescope. The camera attaches directly, with no separate flattener and no back focus spacing to set.
Do I need a field flattener?
With a doublet or a standard triplet, yes, for any sensor larger than a small planetary chip. Without one the stars toward the corners of the frame stretch into short streaks. Petzval, quadruplet and quintuplet astrographs have the correction built in.
What size refractor do I need for galaxies?
Most galaxies are small, so more focal length helps: an 80 to 130mm refractor at 500 to 1,000mm frames them better than a 60mm wide field scope. That longer focal length also asks more of the mount.
How much mount does an imaging refractor need?
Plan on loading a mount to about half its rated payload for photography. A 61mm astrograph with a camera can ride on a star tracker, while a 5-inch triplet with its accessories needs a full equatorial mount.
The Best Refractor Telescope
Nine lens telescopes worth buying, from a $90 travel scope to an apochromatic triplet — what achromat and ED mean for what you see, and when a mirror is the better buy.
Read →The Best Astrophotography Cameras
Your DSLR works to start — then a dedicated cooled astro camera changes everything. Entry to premium ZWO picks, plus the guide cam and brain that tie the rig together.
Read →The Best Telescope Mounts & Tripods
The mount matters more than the telescope for astrophotography. Grab and go GoTo to serious imaging EQ picks, from grab and go trackers to the workhorse EQ6-R.
Read →The Best Astrophotography Setup at Every Budget
Three complete deep sky rigs, itemized — a $500 starter, a $3,000 serious kit, and a $10,000 dream setup. What each part does and why.
Read →The Best Light Pollution Filters for Astrophotography
Four imaging filters, from the $90 dual band that pulls nebulae out of a city sky to the Hubble palette set for a mono camera — and which kind your camera and targets need.
Read →The Best Star Trackers
Four camera trackers worth buying, from a $225 head that fits in a jacket pocket to the GoTo tracker that finds the Andromeda Galaxy for you, and the payload rule.
Read →The Best Telescope for Deep Space
Eight telescopes for galaxies, nebulae and clusters — the 10-inch Dobsonian I’d buy, the 8-inch ladder, the smart scope that stacks them out of city glow, and the f/4 tube for photographing them.
Read →The Best Telescope Dew Heaters and Dew Shields
Fourteen ways to keep a telescope working through a damp night, from a $43 dew shield to automatic controllers and the batteries that run them.
Read →