The Best Astrophotography Accessories
Fourteen parts that automate a deep sky rig, from a $133 guide scope to a $699 power hub: autofocusers, control computers, guide scopes and cameras, a filter wheel, polar alignment cameras and a rotator, with what works with what.
In this guide
There is a point in deep sky photography where the telescope stops being the problem. The mount tracks, the camera cools, the first frames look like the pictures that made you want to do this, and then the temperature drops four degrees and every star in the next hour of data is slightly soft. Or a cable snags at the meridian. Or you spend the best part of a clear night kneeling on wet grass looking for Polaris through a polar scope.
The parts on this page fix those nights. None of them gathers light. They hold focus, steer the mount, switch filters and power everything from one cable, so the rig can run while you sleep. These are fourteen I would look at, with a brand spread on purpose, because the right one depends on what you already own.
Outer Space Trip may earn a commission from links on this page; your price is the same. How we choose. Prices move — the links show current pricing.
What should you buy first?
An autofocuser. Focus drifts as the tube cools, and software that refocuses on its own recovers more lost data than any other single part. A guide scope and guide camera come second if your mount is not already guided. A control computer comes third, and it decides which brands the rest of the rig can use, so read that section before buying it.
ZWO EAF electronic automatic focuser (2025)
It is the autofocuser AstroBackyard uses on two telescopes and calls an affordable, reliable choice for most users, and it is the only motor focuser the ASIAIR will drive. One USB-C cable carries both power and data, so it adds a single cable to the rig. Clamps to the focuser shaft of most refractors and Newtonians with the supplied coupling and bracket, with separate ZWO brackets for Celestron C8/C9.25 and C11/C14; runs from ASIAIR, ASCOM and ZWO’s own software.
- The temperature sensor and hand controller are separate purchases on this version.
- ZWO says its higher current draw makes it incompatible with the first generation ASIAIR and the ASIAIR Pro.
Pegasus Astro FocusCube 3
The temperature probe is in the box and the 6 kg rating is a kilogram above the ZWO unit, which matters with a heavy camera and filter wheel. Forum owners who have run both makes report the FocusCube as the equal of the EAF or better. Mounts to the focuser with the supplied universal L bracket and works with ASCOM, ASCOM Alpaca, INDI and INDIGO software such as NINA, SGPro, Voyager and StellarMate.
- It does not work with the ASIAIR, which only drives ZWO’s own focuser.
- It costs about $43 more than the ZWO EAF at High Point today.
PrimaLuceLab Sesto Senso 2
The motor and control electronics share one housing that clamps straight onto the focuser, so there is no separate bracket to fit. Owners on AstroBin and an independent hands on review report simple installation and reliable focusing. Clamps directly onto focusers with a 25mm shaft housing using the supplied bushings, with no external bracket; controlled through PrimaLuceLab’s PLAY software or its ASCOM driver in NINA and Sequence Generator Pro.
- It needs a 12V power cable as well as USB, where the ZWO and Pegasus units run from USB alone.
- The maker’s own product page could not be reached this session, so specs are from High Point’s listing, and PrimaLuceLab now also sells a Sesto Senso 3.
ZWO ASIAIR Plus 256GB
It replaces a laptop with a box that rides on the telescope and handles polar alignment, plate solving, guiding, autofocus and the imaging sequence from one app. AstroBackyard has reviewed both the original and the Plus and uses it as a main controller. Runs ZWO USB 3.0 and Mini cameras, the ZWO EAF and EFW, many Canon and Nikon bodies and more than 400 mounts from a phone or tablet app; it does not run other makers’ astronomy cameras, focusers or filter wheels.
- It locks the rig to ZWO cameras, focusers and filter wheels.
- A 12V power supply is not included, and ZWO’s page confirms only the storage; the port and Wi-Fi figures here are from High Point’s listing.
StellarMate X (4GB/64GB)
It does the same job as an ASIAIR without limiting the rig to one brand’s cameras and accessories. It is $100 less than the ASIAIR Plus at High Point today. Runs KStars, Ekos and INDI, so it controls cameras, mounts, focusers and filter wheels from many makers, with apps for iOS and Android and Ekos on Windows, macOS or Linux.
- Owners on forums report more setup work and troubleshooting than with an ASIAIR, and at least one switched back.
- The maker’s manual lists no 12V power outputs, so powering cameras and heaters needs a separate hub.
Pegasus Astro Ultimate Powerbox v3
It puts switched 12V power, a powered USB hub, dew control and a temperature and humidity sensor in one 400 g box, so a single power cable and a single USB cable leave the telescope. Each output can be switched and monitored remotely. Takes 12-14V DC on an XT60 input and feeds cameras, mount, focuser and dew heaters; controlled over USB or 2.4GHz Wi-Fi through Pegasus Unity, ASCOM, ASCOM Alpaca, INDI/INDIGO and NINA.
- It is the most expensive item in this guide.
- Owners report the six switched outputs cap at about 6A each, which is marginal for the most power hungry cooled cameras.
William Optics UniGuide 32mm guide scope
At about 240 g with a 120mm focal length, it is sized for small wide field and portable imaging rigs. An independent long term review reported focus holding for nearly a year and recommended it over the ZWO Mini Guide Scope. Slides into a Vixen/Synta-style finder shoe and takes 1.25-inch barrel guide cameras such as the ZWO Mini and QHY5 series, or an M42 thread.
- It will not take larger non Mini planetary style cameras, per that review.
- Its short 120mm focal length is a poor match for long focal length telescopes, where the same review points to an off axis guider instead.
Sky-Watcher EvoGuide 50DX guide scope
Its 242mm focal length is about twice that of a 32mm mini guide scope, which gives finer guiding resolution for longer imaging scopes. With Sky-Watcher’s optional flattener it doubles as a small wide field astrograph, as NightSkyPix’s two-part review covers. Comes with tube rings, a finder stalk and a V-style mounting plate, and takes 1.25-inch guide cameras or an M42 threaded camera.
- It costs more than twice as much as a 32mm guide scope and is heavier.
- Buyer reviews mention build quality that is short of the optics, and it will not reach focus with a star diagonal.
Celestron Off-Axis Guider
The 12.5mm prism is larger than the 8mm prism in the common budget units, which makes guide stars easier to find at SCT focal lengths. It ships with the adapters and spacers for SCT, EdgeHD, M48 and M42 imaging trains, and it has a helical focuser for the guide camera. Includes SCT/EdgeHD, M48 and M42 adapters and T-thread spacers; the guide camera attaches by M42 thread or a 1.25-inch adapter and the imaging camera by M42 or M48.
- Owners call it bulky, so back focus has to be planned carefully.
- First setup is fiddly; an EdgeHD 8 owner on AstroBin needed daylight to get the guide camera to focus.
QHY5III200M v2 guide camera
BBC Sky at Night Magazine’s review found it sensitive enough for PHD2 to keep guiding through thin cloud that hid the stars from view. The 1/1.8-inch sensor is larger than the one in entry level guide cameras, which helps an off axis guider find a star. Fits 1.25-inch guide scopes and off axis guiders, or C/CS-mount, and guides through PHD2 or its ST-4 port; it is not supported by the ASIAIR, which needs a ZWO camera.
- It will not work with an ASIAIR.
- QHY’s own page gives the USB standard as both USB 3.0 and USB 3.2 Gen1, so treat the exact speed as unconfirmed.
ZWO EFW 7x36mm electronic filter wheel (2025)
Seven positions hold a full LRGB and three-filter narrowband set, so an imaging sequence can change filters unattended. It is the only filter wheel line an ASIAIR will drive. Holds seven 36mm unmounted filters and is controlled from ASIAIR, ASIStudio and ASCOM software over one USB cable with no separate power supply.
- The 36mm size takes unmounted filters only, which are fiddlier to load than threaded ones.
- No independent long form review of this 2025 version was found; the evidence is retailer buyer reviews of the EFW line.
QHY PoleMaster
It replaces crouching at the polar scope with a camera view and a short on screen routine. AstroBackyard, Galactic Hunter and Astronomy Technology Today have each reviewed it favorably. Mounts on the front of the polar axis with a mount specific adapter; High Point’s listing offers adapters for the EQ6-R/CGEM/Atlas family, HEQ5/Sirius, AVX/CG-5, EQ8 and several iOptron mounts.
- The mount adapter is not included: $33 for most mounts or $50 for the EQ8 at High Point.
- It needs a computer running QHY’s PoleMaster software over a Mini USB 2.0 cable, and an ASIAIR owner already has a polar alignment routine in the app.
iOptron iPolar electronic polarscope (CGEM / NEQ6 / AZ-EQ6 adapter)
iOptron states that neither Polaris nor Sigma Octantis has to be visible, because it plate solves the star field around the pole. Unlike the PoleMaster listing, the mount adapter is included in the price. This version includes the adapter for Celestron CGEM, Sky-Watcher NEQ6 and AZ-EQ6 mounts; High Point sells other versions for the HEQ5, AVX and iOptron mounts.
- The software is Windows only.
- Buyer reviews on iOptron’s own page average about 3 out of 5, and High Point’s listing does not name the EQ6-R among the mounts this adapter fits.
Pegasus Astro Falcon Rotator v2
It lets software set and repeat the camera angle, which matters for framing mosaics and for remote rigs nobody can reach by hand. Pegasus rates it for a 6 kg imaging train and includes two M68 to M54 adapters. Sits between the telescope and camera on M68 or M54 threads and is powered and controlled over one USB-C cable through Pegasus Unity, ASCOM and ASCOM Alpaca.
- It adds 0.7 kg and 16mm to the imaging train, which not every reducer or flattener spacing can spare.
- Independent reviews of the v2 are thin; most of what is published is retailer and manufacturer material.
The picks at a glance
Prices are High Point Scientific’s on the day I read them, and every one was in stock.
| Product | Type | Key spec | Price |
|---|---|---|---|
| ZWO EAF electronic automatic focuser (2025) | Autofocuser | Power and data: USB Type-C, 5V 500mA | $179 |
| Pegasus Astro FocusCube 3 | Autofocuser | Power and data: USB-C, 5V up to 900mA, plus Wi-Fi | $222 |
| PrimaLuceLab Sesto Senso 2 | Autofocuser | Resolution: 0.7 microns per step | $229 |
| ZWO ASIAIR Plus 256GB | Control computer | Storage: 256GB internal eMMC, no TF card slot | $399 |
| StellarMate X (4GB/64GB) | Control computer | Processor: Intel Celeron J4125 quad core | $299 |
| Pegasus Astro Ultimate Powerbox v3 | Power and USB hub | Power: 12V, up to 20A (240W) total | $699 |
| William Optics UniGuide 32mm guide scope | Guide scope | Aperture: 32 mm | $133 |
| Sky-Watcher EvoGuide 50DX guide scope | Guide scope | Aperture: 50 mm ED doublet | $319 |
| Celestron Off-Axis Guider | Off axis guider | Prism: 12.5 mm, multicoated | $350 |
| QHY5III200M v2 guide camera | Guide camera | Sensor: SC2210 mono, 1920 x 1080, 1/1.8 inch | $279 |
| ZWO EFW 7x36mm electronic filter wheel (2025) | Filter wheel | Filters: Seven 36mm unmounted, 1.9 to 3.5mm thick | $269 |
| QHY PoleMaster | Polar alignment camera | Field of view: 11 x 8 degrees | $224 |
| iOptron iPolar electronic polarscope (CGEM / NEQ6 / AZ-EQ6 adapter) | Polar alignment camera | Field of view: About 13 degrees | $238 |
| Pegasus Astro Falcon Rotator v2 | Rotator | Back focus: 16 mm | $488 |
The control computer decides the rest
A small computer on the telescope runs the camera, mount, focuser and guiding, and you watch from a phone or a laptop indoors. There are two approaches. A closed system is the quickest to set up and works with its own maker’s cameras, focusers and filter wheels. An open system runs standard astronomy software and talks to hardware from most brands, in exchange for more setup.
Neither is wrong. If your camera, focuser and wheel are all from one maker, the closed system is the short path. If you own a mix, or expect to, start open. The cameras in the camera guide are the usual starting point for that decision.
Autofocus
A motor on the focuser knob, a temperature probe, and software that measures star size and moves the focuser until the stars are smallest. It repeats when the temperature changes or the filter does. The differences between units are how they attach to your focuser, whether they need separate 12V power or run from USB, and which software can drive them.
Guiding: guide scope or off axis guider
Guiding uses a second camera to watch one star and send small corrections to the mount. A guide scope is a small telescope riding on top of the main one, simple to set up and right for short focal lengths. An off axis guider picks off light from the main telescope with a small prism, so the guide camera sees exactly what the imaging camera sees. It is the better answer for long focal lengths and for Schmidt-Cassegrains, where a moving mirror makes a separate guide scope disagree with the main tube.
A rule of thumb for a guide scope: its focal length should be a reasonable fraction of the main telescope’s, so a 32 mm guider suits the small refractors in the apo refractor guide and a 50 mm one suits longer tubes.
Polar alignment without the polar scope
An equatorial mount has to point at the celestial pole before anything else works. A polar alignment camera looks at the sky near the pole and shows on screen which way to turn the mount’s bolts. It takes a few minutes standing up. Many control computers can also polar align through the main camera, so check what yours does before buying a dedicated one.
Power and cables
A full rig has a mount, a cooled camera, a focuser, dew heaters and a computer, each with its own power lead and most with a USB cable. A hub on the telescope takes one 12V feed and one data cable and distributes both, which removes the bundle that drags as the mount turns. For dew heaters and the batteries to run all of this in a field, see the dew and field power guide.
Filter wheels and rotators
A filter wheel only matters with a monochrome camera, where each color and each narrowband filter is a separate exposure and the wheel changes them for you through the night. The filter guide covers what goes in it. A rotator turns the camera to frame a target and returns to the same angle on a later night. It is a part for mosaics and remote observatories, and most people never need one.
What to skip
A rotator or a top end power hub on a first rig. A filter wheel for a color camera. And a control computer bought before checking that it supports the camera you already own.
If you want one answer
An autofocuser first, then a guide scope and guide camera sized to your telescope, then the control computer that matches your camera. That order fixes the three things that waste the most clear nights.
Frequently Asked Questions
What astrophotography accessory should I buy first?
An electronic autofocuser. Focus shifts as the telescope cools through the night, and an autofocuser lets software refocus on its own, which saves more data than any other single accessory.
Do I need a guide scope or an off axis guider?
A guide scope is simpler and suits short focal lengths such as small refractors. An off axis guider uses the main telescope's own light, which makes it the better choice at long focal lengths and on Schmidt-Cassegrains.
Is the ASIAIR worth it?
If your camera, focuser and filter wheel are ZWO, it is the quickest way to a working automated rig. It works with ZWO astronomy cameras and accessories, so a rig built from several brands is better served by an open control computer.
Do I need a polar alignment camera?
Not always. Many control computers and imaging programs can polar align using the main camera. A dedicated polar alignment camera is useful when your software does not, or when you want alignment finished before the imaging camera is set up.
Do I need a filter wheel?
Only with a monochrome camera, where each color or narrowband filter is a separate set of exposures. A one-shot color camera records all three colors at once and does not need a wheel.
How do I power an astrophotography rig in the field?
From a 12V battery through a power hub mounted on the telescope. The hub distributes power and USB to the camera, focuser and dew heaters, so only one or two cables run down to the ground.
The Best Astrophotography Cameras
Your DSLR works to start — then a dedicated cooled astro camera changes everything. Entry to premium ZWO picks, plus the guide cam and brain that tie the rig together.
Read →The Best Apo Refractors for Astrophotography
Ten imaging refractors from a $605 triplet to a $3,499 five-inch astrograph, plus the flatteners that complete them and how to match a scope to a sensor.
Read →The Best Telescope Mounts & Tripods
The mount matters more than the telescope for astrophotography. Grab and go GoTo to serious imaging EQ picks, from grab and go trackers to the workhorse EQ6-R.
Read →The Best Astrophotography Setup at Every Budget
Three complete deep sky rigs, itemized — a $500 starter, a $3,000 serious kit, and a $10,000 dream setup. What each part does and why.
Read →The Best Light Pollution Filters for Astrophotography
Four imaging filters, from the $90 dual band that pulls nebulae out of a city sky to the Hubble palette set for a mono camera — and which kind your camera and targets need.
Read →The Best Telescope Dew Heaters and Dew Shields
Fourteen ways to keep a telescope working through a damp night, from a $43 dew shield to automatic controllers and the batteries that run them.
Read →The Best Star Trackers
Four camera trackers worth buying, from a $225 head that fits in a jacket pocket to the GoTo tracker that finds the Andromeda Galaxy for you, and the payload rule.
Read →The Best Schmidt-Cassegrain Accessories and Upgrades
Thirteen upgrades for a Celestron or Meade SCT, from $26 collimation knobs to a $999 HyperStar, with what fits which telescope.
Read →